When you turn off a device or device, you can probably assume that it is already turned off and is no longer consuming power. But this is not actually the case. a lot in common– From the laptop charger to the printer – Turn on certain functions when plugged in and Even if the device itself is not turned on.
Fortunately, the solution is very easy – just unplug the devices. Unplugging them will silently stop the power drain and increase your bills, saving you electricity andat the long term.
But how much money do splitters actually save? Do the energy savings you get from unplugging the appliances matter much? And is it worth the inconvenience that the devices are constantly connected and disconnected? Below we’ll explore why unplugged devices can save you, how much you can save, and ways to help make it easier to disable plugged devices.
Why separate devices save money?
It seems illogical to separate the devices. After all, they’re off, so why are they sucking up energy?
The truth is, your devices actually still use power even when they’re turned off but are still plugged in, according to Energy.gov. Whether the device is turned off or in standby mode, some of the worst offenders are:
- A device that may continue to use power permanently on lights or other displays that show the device is off
- Computers that have simply been put to sleep
- Chargers that still consume power even if the device is not connected
- Media players that are constantly drawing power, especially those that may still be checking for updates in the background
- Phones with screens that appear when not in active use, such as cordless phones
- New smart home appliances such as refrigerators, washers, and dryers that have always-on screens, internet access, and electronic controls
The power that is used from these devices while not actively using standby power is often called, but it also goes by other names such as phantom load, shadow load, idle current or even.
Save electricity and money from backup power control
Many people are shocked when they realize how much spare power you can add. Standby power accounts for 5-10% of residential energy use, according to the US Department of Energy. Separators can save up to $100 a year on the average family.
However, how much you save may depend on the number of devices you use and your habits with them. For example, an educational experiment from Colorado State University found that a combo radio/CD player/tape player consistently used 4 watts whether or not it was in use. Unplugging it when not in use will save energy up to 100 times over the life of the device.
A study from the Natural Resources Defense Council found that reducing the load from always-on appliances would save consumers a total of $8 billion annually and avoid using 64 billion kilowatt-hours of electricity annually. It also has environmental benefits, such as preventing 44 million metric tons of carbon dioxide pollution. The Natural Resources Defense Council (NRDC) has estimated the cost of always-on devices at an average of $165 per household per year.
How to control the backup power
The first step, of course, is to separate out anything that is not actively used or is not used often. Examples of easily detachable devices include televisions and receivers in guest rooms. It is also easy to disconnect media players when not in use, such as a radio or CD player. When you take your device out of the charger, it can also help you get used to unplugging that charger. You might also be surprised how many devices we have connected and we don’t use anymore. Examples could include old cordless phones, old media players, or decorative lights rather than functionality.
However, disconnecting and reconnecting everything can get very tedious, especially if your outlets are in hard-to-reach places. If the port is not accessible, it will be difficult to keep up. So you can also set up ways to make the cut-off of the phantom pregnancy more automatic. You can connect devices to power strips. In this way, a single click on the power switch button can turn off multiple devices. You also get timers to connect devices or smart outlets so that you can automatically turn on when a device is powered on. For example, you can set the TV’s power time to only be connected during peak usage times such as evenings or weekends.
You can also consider getting a. Many of these products are rated as using less spare power than products that are not Energy Star rated.
More resources to save electricity
With energy bills rising and becoming increasingly erratic over time, it’s more necessary than ever to find ways to save on electricity costs. For example, in addition to separating appliances at home, you can take a look at our guide aboutwhen not in use. Another major way to affect your electric/heating bill for the better is to know You should set for your home. You can also check out our guide on To save on gas and electricity bill, such as turning off the water heater or changing air filters.